Embedded Files
Thank you for your purchase!
Below are instructions for the care and operation of our products. If you have any further questions, please contact us!
Wood (Cutting Boards, Serving Trays, Etc.)
Wood (Cutting Boards, Serving Trays, Etc.)
Handle With Care
Hand Wash Only
Lather Board with Food Safe Oil Every 1-2 Months to Prevent Cracking Over Time (originally oiled with Mineral Oil)
Motion Sensor Light
Motion Sensor Light
Hold the mode button down for 5 seconds to turn it on/off.
Then click the Mode button to select light color and light mode. Pure white > warm white > red > blue > green > orange > pink > purple > fading RGB > fast flashing RGB > slow flashing RGB.
Motion sensor mode: Double click Mode button to enable or disable this function (it will flash one time). When someone passes through within 6-9ft, it will light up automatically and turns off 30 seconds later.
Connect the USB cable to the USB power source. The red charge indicator will turn off when it is fully charged.
Magnetic Mount – Each magnet has adhesive for easy mounting if desired.
Plug-In Night Lights
Plug-In Night Lights
When plugged in, the nightlight will be in either Always On mode or Nightlight mode. When first plugged in, the nightlight will start in Nightlight mode.
Always On Mode:
If the nightlight is in the light, press the on/off button once to turn on Always On mode.
Once the nightlight is lit, press the on/off button again to change the color mode (solid colors and flashing)
Nightlight Mode:
If the nightlight is in Always On mode, press and hold the on/off button for at least 5 seconds until the light turns off. The nightlight will now be in Nightlight mode.
Once the nightlight is in the dark, the light will come on automatically.
The color can be changed when it is dark by pressing the on/off button (solid colors and flashing).
When the nightlight is in the light again, the light will turn off.
LED Base
LED Base
Battery Operated (3 AAs) or Plug-In (micro-USB)
To turn on hold the "Power Button" or use the remote
Select color by tapping power button or using remote options
To turn off, hold the "Power Button" again or use the remote
For remote use, remote must be pointed at front of base so sensor can read the signal
Light-Up Ornament
Light-Up Ornament
To turn on the ornament, move the on/off switch on the side to the "ON" position.
Press the Color Control Button on the front to set light color and mode (multiple solid colors and flashing mode).
To turn off, move the on/off switch on the side to the “OFF” position to turn it off.
To recharge the ornament, connect the micro-USB cable to a USB power source. The red charge indicator LED (inside the black housing) will turn on during charge and turn off when it is fully charged.
Apparel
Apparel
Wash Inside Out
Air Dry Only
Page updated
Google Sites
Report abuse